Sorry this is not for the RC45, but I need a set of race bodywork for my OW01 and I see (from the previous post) that SebiMoto have a big range of bikes covered and make a set for this bike.
Their prices are good and the Czech guy I just spoke to on the 'phone was very helpful.
Can anyone that has brought any of their gear please advise on the quality/fit of this SebiMoto stuff please, or maybe recommend a different supplier?
Quality / fit is more important than cost.
SebiMoto bodywork
Moderators: StephenRC45, Dave45
-
MarkJHarris
- Advanced Member
- Posts: 41
- Joined: Thu Sep 08, 2011 11:48 am
- Location: IOM
Sebimoto Bodywork
I have a set of Carbon panels and to be honest, I suspect they were an early set. I've sent pictures of them to the factory to ask why they don't fit at all. The front lower edge where they join is quite mis-shaped and prevents a good join so the back won't even sit correctly.
The seat unit is nice though and the fender and scoops OK. I did get them from Ebay a while back. I'm using them as a practice set for cutting holes, etc. it's all they're good for......
MarkRC45 was quite unimpressed with the quality but I have heard the newer Carbon/Kevlar ones are much better.
The seat unit is nice though and the fender and scoops OK. I did get them from Ebay a while back. I'm using them as a practice set for cutting holes, etc. it's all they're good for......
MarkRC45 was quite unimpressed with the quality but I have heard the newer Carbon/Kevlar ones are much better.
Mark
#133
#133